USB S5/S7 Prommer (Siemens)

The USB S5/S7 Prommer is used to program S5 Eproms, S5 EEproms, S5/S7 Flash Eproms and S7 MicroMemoryCards.
The USB S5/S7 Prommer is connected via the USB port of the PC.
All Eprom functions such as erasing, displaying, reading, transferring, comparing, and erase check are available.
The USB S5/S7 Prommer works together with S5/S7 for Windows® , STEP®5 and STEP®7

FlashPROMMER

The FlashPROMMER is used to program the new Memory Cards (Flash PROMMS) for the S5 and the S7-300® and S7-400® PLC series.
The FlashPROMMER is handled in exactly the same way as the Eprommer.
The FlashPROMMER is also connected via the parallel printer port of the PC.
All Eproms options such as erasing, displaying, reading, transferring, comparing, and erase check are available.
Important note: The FlashPROMMER only works together with S5/S7 for Windows®

EPROM-Eraser LG07

The robust design of this EPROM-Eraser LG07 will withstand even the hardest use. The EPROM-Eraser LG07 has an integrated timer (max. 60 min.) and an indicator to control the erasing procedure. The high power ultraviolet ray lamp has a long life. The ultraviolet ray lamp is turned off if the drawer is opened accidentally. The drawer has roller bearings for easy sliding. Drawer size: 60x90x21mm. The drawer has space for one (1) S5 Eprom Module or up to seven DIP 28 Eprom’s. A 230V / 50/60 Hz 12VA power supply is integrated.

EPROM-Eraser UVL3

Designed for portability the EPROM-Eraser UVL3 offers an easy and safe way to erase Eprom Modules and Eprom chips. The small size and its low weight are the special features of the EPROM-Eraser UVL3. The bottom of the eraser is open. To erase modules the eraser is placed over the Eprom. An adjustable timer to set the erasure time is integrated. The EPROM-Eraser UVL3 can be operated with the 24V from a PLC power supply. Optionally an external 230V / 24V power supply is available.